This article is taken from the Swyx Forum Archive (2007-2014) and was originally posted 27.11.2010 by me.
When dialing within SwyxWare (regardless if in a SwyxIt!, SwyxPhone or even a Connect To block within the Call Routing) you can use the following special dial codes:
- x - wait for the call to be connected
- , (comma) - wait for 2 seconds
Example:
- 123x,#,,66
Calls for example a door opener at extension 123, waits for the call to be connected, waits for two seconds, dials #, wait another 4 seconds, dials 66
You should also take a look into the Feature Codes list.
0